Change wifi password in windows 10 -Your Wi-Fi router comes with a default network name and password, and both usually are printed on the router itself . But you can change the name and password to whatever you want with just a few clicks.
Changing the default name of your network gives you the opportunity to use something more personalized than “NETGEAR30” or “Linksys.” You can also use a password that is easier to remember.
Find out the IP Address of your Router
[Step 1 to Change wifi password in windows 10]
These settings are controlled from your wireless router, so you need to change them on the router itself.
Normally, you need to enter the web interface of your router through a web browser and change it there. You can look at the specific instructions of your online model, but the instructions that we give you below will work in most of the routers.
On a Windows PC, the fastest way to find out this information is through the command prompt. To open it, press the Windows + R key, type “cmd” without the quotes and press Enter.
Type “ipconfig” without the quotes in the command prompt window and press Enter. You will see the IP address of your router to the right of “Default Gateway” or “Default Gateway”, under the network connection you are currently using.
This works in Windows 7, 8, 8.1 and 10, and even in previous versions of Windows.
Access the web interface
[Step 2 to Change wifi password in windows 10]
Copy the IP address that you found, type it in the address bar of your web browser and press Enter.
The system will ask you to enter the username and password of your router to access. If you have changed your username and password and have customized them, enter that information.
If you have not already done so, you need to use the default login information. Often, the default password is “admin”, or you just have to leave the space blank. In some routers, you may have to put “admin” as the user name and leave the password empty, in others both the user and the password is “admin”, or “admin” may be the password and the user is what You have to leave blank.
To find out the user and password of your router, perform a web search with “default password” and the model name of your router, or check the router’s documentation.
If you have set a custom password but do not remember it, you have to reset your router to its initial settings.
Change the Name and Password of your Wi-Fi Network
[Step 3 to Change wifi password in windows 10]
After signing in, look for the Wi-Fi settings. Depending on your router, these may be in the upper right area of the first page you see, or they may be in a section called “Wi-Fi”, “Wireless”, “Wireless Networks” or similar. Search a little and you should find it without problems.
You may see a field called “SSID” or “Network Name.” Both are the same, the name of your wireless network.
The “password” and “password” fields are also the same. It is recommended to choose a sufficiently long password, and you may also want to use a phrase (series of words) better than a single word. This field can also be found under the name “key”, WPA-PSK key, or something similar.
Once you have entered the new name and password of your Wi-Fi network, you have to click on “Apply”, “Save” or a similar button to save your settings.
If you are connected to the user interface of your router via Wi-Fi, your device will be disconnected, as the router will deactivate the old Wi-Fi connection and activate a new one. In each device you use you will have to open the Wi-Fi settings, choose the new name of the Wi-Fi connection and enter your new password correctly. All devices that are currently included in the network will need to connect again before they can connect again.
This was how you can Change wifi password in windows 10.What do you think?, tell us in comments below.